Categorii
Oferte speciale
Boxe, incinte acustice Boxe active Boxe pasive Boxe club Line array In perete/in tavan Sisteme Boxe Boxe outdoor Componente boxe Monitoare studio Boxe acasa Casti audio Mixere audio Amplificatoare CD/MP3 Playere Public Address Procesoare sunet Echipament DJ Microfoane Arhitecturale LED Instrumente muzicale Lumini Lasere Stative Flight case-uri Tonomate (Juke Box-uri) Efecte speciale Scenotehnica Conectica
;)
;)
;)
Comenzi telefonice:
0725.918.590
0725.918.590
Inca ai indoieli? Citeste ce ne scriu in fiecare zi clientii nostri!
Buna ziua. Doresc prin acest mail sa va informez ca, am intrat in posesia comenzii si de asemenea ca, sunt foarte multumit atat de modul in care a decurs tot procesul, livrarea fiind foarte rapida, cat si de calitatea produsului comandat. Toate cele bune,
Sebastian Varjan
(Bistrita, jud. Bistrita-Nasaud)
(Bistrita, jud. Bistrita-Nasaud)
Scrie-ne si tu!
The Tannoy CMS801 DC is still extremely compact given it's larger format. This full bandwidth, high power and high sensitivity ceiling monitor system that is specifically designed for applications requiring the combination of higher output levels as well as premium sonic quality for music and speech reinforcement, exceptional intelligibility and long term reliability.
The design comprises a 200mm (8.00”) Dual Concentric™ transducer mounted in a rigidly constructed injection moulded. vented front baffle. This is manufactured from paintable UV/weather resistant UL94V-0 ABS material. Spring loaded self-aligning clamps make for quick and easy installation as well as ensuring a secure, performance enhancing bond with the ceiling material. All models are supplied with two tile support rails and one C-ring included in the package.
A plaster (mud) ring is available as an optional accessory.
This product is Listed by Underwriters Laboratories Inc. Representative samples of this product have been evaluated by UL and meet applicable safety standards relating to UL-1480 and UL-2043.
CMS801 DC
SYSTEM
Frequency Response (-3dB) (1) BM Back can 47Hz - 30kHz
Frequency Range (-10dB) (1) BM Back can 40Hz - 35kHz
Frequency Range (-10dB) (1) PI Back can 41Hz - 35kHz
System Sensitivity (1W @1m) (2) 92dB (1W = 2.83V for 8 Ohms)
Nominal Coverage Angle 90 degrees conical
Coverage Angle (1kHz to 6kHz) 100 degrees
Directivity Factor (Q) 5.5 averaged 1kHz to 6kHz
Directivity Index (DI) 7.2 averaged 1kHz to 6kHz
Rated Maximum SPL Average: 112dB
Peak: 118dB
Average: 110dB (with THP60)
Power Handling (3) Average: 90W
Programme: 180W
Peak: 360W
Recommended Amplifier Power 180W @ 8 Ohms
Nominal Impedance 8 Ohms
Transformer Taps (via front rotary switch) 70V: 60W / 30W / 15W / 7.5W / OFF
& Low Impedance operation
100V: 60W / 30W / 15W / OFF
& Low Impedance operation
Crossover 2kHz - 2nd order LF, 2nd order HF
(with dynamic HF protection)
TRANSDUCERS
Low Frequency 1 x 200mm (8.00") Dual Concentric™ constant directivity driver with multi fibre paper pulp cone
High Frequency 1 x 25mm (1.00") titanium dome with neodymium magnet system
PHYSICAL
Enclosure Back Can: Zinc plated steel
Baffle: Reflex loaded UL 94V-0 rated ABS Grille: Steel, with weather resistant coating
Safety Features Safety ring located at rear of enclosure for load bearing safety bond
Clamping Design Min / Max clamping range: 0.0mm (0.0") / 20.0mm (0.79")
Recommended clamp torque: 1.5Nm
Back Can Options Blind Mount (BM): Complete with fixed back can
Pre Install (PI): Separate back can for pre installation
Cable Entry Options Cable clamp & squeeze connector for
conduit up to 22mm
Conduit Knockouts 3 Sets of horizontal positions: 19 / 22 / 28mm 0.75 / 0.87 / 1.10"
Connectors Removable locking connector with screw terminals with "loop through" facility
Safety Agency Ratings
CE, UL-1480, UL-2043
BM Hole Cutout Diameter 295mm (11.61")
PI Hole Cutout Diameter 295mm (11.61")
Dimensions
Bezel diameter: 325mm (12.80")
BM model: Front of ceiling to rear of back can 310.50mm (12.22")
BM model: Front of ceiling to top of safety loop 327.80mm (12.90")
PI model: Front of ceiling surface to rear of speaker unit 118.70mm (4.67")
PI model: Front of accessory back can bezel to top of safety loop 168.50mm (6.63")
Net Weight (ea) CMS801 DC BM: 6.5kg (14.33lbs)
CMS801 DC PI: 2.5kg (5.51lbs)
CMS801 Plaster (Mud) Ring: 0.3685kg (0.81lbs)
CMS801 PI 8 Ohm back can: 4kg (8.81lbs)
CMS801 DC 60W transformer kit 8 Ohm : 1.095kg (2.41lbs)
Included Accessories C Ring
Tile bridge
Paint mask
Cutout template
Grille
Optional Accessories Plaster (mud) ring
Notes: (1) Average over stated Bandwidth. Measured in an IEC baffle in an Anechoic Chamber (2) Unweighted Pink noise input, measured at 1m on axis (3) Long term power handling capacity as defined in EIA - 426B test
The design comprises a 200mm (8.00”) Dual Concentric™ transducer mounted in a rigidly constructed injection moulded. vented front baffle. This is manufactured from paintable UV/weather resistant UL94V-0 ABS material. Spring loaded self-aligning clamps make for quick and easy installation as well as ensuring a secure, performance enhancing bond with the ceiling material. All models are supplied with two tile support rails and one C-ring included in the package.
A plaster (mud) ring is available as an optional accessory.
This product is Listed by Underwriters Laboratories Inc. Representative samples of this product have been evaluated by UL and meet applicable safety standards relating to UL-1480 and UL-2043.
CMS801 DC
SYSTEM
Frequency Response (-3dB) (1) BM Back can 47Hz - 30kHz
Frequency Range (-10dB) (1) BM Back can 40Hz - 35kHz
Frequency Range (-10dB) (1) PI Back can 41Hz - 35kHz
System Sensitivity (1W @1m) (2) 92dB (1W = 2.83V for 8 Ohms)
Nominal Coverage Angle 90 degrees conical
Coverage Angle (1kHz to 6kHz) 100 degrees
Directivity Factor (Q) 5.5 averaged 1kHz to 6kHz
Directivity Index (DI) 7.2 averaged 1kHz to 6kHz
Rated Maximum SPL Average: 112dB
Peak: 118dB
Average: 110dB (with THP60)
Power Handling (3) Average: 90W
Programme: 180W
Peak: 360W
Recommended Amplifier Power 180W @ 8 Ohms
Nominal Impedance 8 Ohms
Transformer Taps (via front rotary switch) 70V: 60W / 30W / 15W / 7.5W / OFF
& Low Impedance operation
100V: 60W / 30W / 15W / OFF
& Low Impedance operation
Crossover 2kHz - 2nd order LF, 2nd order HF
(with dynamic HF protection)
TRANSDUCERS
Low Frequency 1 x 200mm (8.00") Dual Concentric™ constant directivity driver with multi fibre paper pulp cone
High Frequency 1 x 25mm (1.00") titanium dome with neodymium magnet system
PHYSICAL
Enclosure Back Can: Zinc plated steel
Baffle: Reflex loaded UL 94V-0 rated ABS Grille: Steel, with weather resistant coating
Safety Features Safety ring located at rear of enclosure for load bearing safety bond
Clamping Design Min / Max clamping range: 0.0mm (0.0") / 20.0mm (0.79")
Recommended clamp torque: 1.5Nm
Back Can Options Blind Mount (BM): Complete with fixed back can
Pre Install (PI): Separate back can for pre installation
Cable Entry Options Cable clamp & squeeze connector for
conduit up to 22mm
Conduit Knockouts 3 Sets of horizontal positions: 19 / 22 / 28mm 0.75 / 0.87 / 1.10"
Connectors Removable locking connector with screw terminals with "loop through" facility
Safety Agency Ratings
CE, UL-1480, UL-2043
BM Hole Cutout Diameter 295mm (11.61")
PI Hole Cutout Diameter 295mm (11.61")
Dimensions
Bezel diameter: 325mm (12.80")
BM model: Front of ceiling to rear of back can 310.50mm (12.22")
BM model: Front of ceiling to top of safety loop 327.80mm (12.90")
PI model: Front of ceiling surface to rear of speaker unit 118.70mm (4.67")
PI model: Front of accessory back can bezel to top of safety loop 168.50mm (6.63")
Net Weight (ea) CMS801 DC BM: 6.5kg (14.33lbs)
CMS801 DC PI: 2.5kg (5.51lbs)
CMS801 Plaster (Mud) Ring: 0.3685kg (0.81lbs)
CMS801 PI 8 Ohm back can: 4kg (8.81lbs)
CMS801 DC 60W transformer kit 8 Ohm : 1.095kg (2.41lbs)
Included Accessories C Ring
Tile bridge
Paint mask
Cutout template
Grille
Optional Accessories Plaster (mud) ring
Notes: (1) Average over stated Bandwidth. Measured in an IEC baffle in an Anechoic Chamber (2) Unweighted Pink noise input, measured at 1m on axis (3) Long term power handling capacity as defined in EIA - 426B test
Ai nevoie de ajutor?
Info Box
Audiomag.ro este cel mai mare magazin online de echipamente profesionale de sunet si lumini din Romania. Oferim o gama larga de: incinte acustice, mixere, amplificatoare, procesoare sunet, platane, echipamente dj, efecte lumini, lasere, efecte fum, structuri scene si altele.
Brand-urile pe care le importam in exclusivitate in Romania sunt Tannoy, Lab.gruppen, Montarbo, Master-Audio, JB Systems, Briteq, Synq, Powersoft, Sabine, UniElectronic, SFAT.
Nu ai bani?
La AudioMag ai acum posibilitatea de a cumpara in rate! Pentru comenzile cu o valoare cuprinsa intre 300 si 3000 Euro, poti obtine un credit simplu si rapid! Contacteaza-ne chiar acum!
Detalii comanda
Produsele aflate in stoc sunt livrate prin FAN Courier in termen de 24 de ore.
Pentru toate produsele comandate, Audiomag ofera 2 ani garantie.
Plata se face la primirea produsului.
Transportul este gratuit pentru comenzile in valoare mai mare de 300 RON.
Daca, din orice motiv, nu sunteti pe deplin multumit de un anumit produs, il puteti returna in termen de 7 zile si acesta va fi inlocuit sau veti primi banii inapoi.
